Grundfos is a leading company in the creation and commercialization of water pumps of incomparable quality. Since the 1940s, Grundfos has created solutions that provide the vital liquid for the needs of its customers, respecting, protecting and guaranteeing the water courses.
Poul Due Jensen (founder of Grundfos) received an order in 1945 to develop a small automatic water supply system and, not being able to find an electric pump of satisfactory quality, decided to develop it himself. This marks the beginning of the company’s industrial activity.
Today, Grundfos develops specialized pumps for almost any type of industry with specific water needs, such as:
Poul Due Jensen (founder of Grundfos) received an order in 1945 to develop a small automatic water supply system and, not being able to find an electric pump of satisfactory quality, decided to develop it himself. This marks the beginning of the company’s industrial activity.
Today, Grundfos develops specialized pumps for almost any type of industry with specific water needs, such as:
At Power Depot we only distribute and market the highest quality products to ensure that our customers’ needs are met and exceeded. That is why we are proud to say that we are official Grundfos distributors. Our staff is highly trained and certified to help you find the product that meets your project needs.
Visit our website to see the Grundfos catalog available
The range consists of pumps of various sizes, and each pump size is available with an optional number of stages that can be adapted to any operating point.
Features:
Available in 4″, 6″, 8″, and 10″.
HP:
0.5 – 250
Phases:
Single-phase, Three-phase
Voltage:
230, 460
Applications:
Uses:
Industrial and commercial
Ideal for smaller diameter piping systems where flow rates are typically lower. Often important when pumping from remote areas, isolated houses, etc.
Features:
This type of pump is suitable for pumping liquid that has a high sand content.
HP:
2 – 5.5
Phases:
Three-phase
Voltage:
230, 460
Applications:
Areas without sewer systems or areas where gravitation
Uses:
Industrial
For groundwater extraction.
Features:
The long, narrow pump with a diameter of only 3″, fits perfectly in small bores of the same size or in 4″ bores that over time have reduced in size because of scale deposits. Its compact design and key features, such as dry running protection and soft start to reduce motor wear. Model SQ & SQE.
HP:
½ – 1.5
Phases:
Single-phase
Voltage:
115, 230
Applications:
Uses:
Residential and Commercial
UNILIFT AP are submersible wastewater pumps suitable for both permanent and temporary installations.
Features:
The pump can be used as a portable unit or fixed installation inside and outside buildings.
HP:
⅓ to 1.5
Voltage:
1 x 115 or 230
Flow rate:
up to 154 GPM
Maximum load:
52ft (16 mt)
Solids passage
up to 2 in
Applications:
Uses:
Residential and Commercial
UNILIFT AP (B) is a stainless-steel submersible pump designed to pump wastewater with particles up to 50 mm.
Features:
The pump can be used as a portable unit or fixed installation inside and outside buildings.
HP:
⅓ to 1.5
Voltage:
1 x 115 or 230
Flow rate:
up to 154 GPM
Maximum load:
52ft (16 mt)
Solids passage
up to 2 in
Applications:
Uses:
Residential and Commercial
Grundfos UNILIFT KP pumps are stainless steel submersible pumps designed for pumping non-aggressive (non-corrosive) water and raw sewage such as drainage and domestic discharges with particles up to 10 mm.
Features:
Pump can be used as a portable unit or fixed installation inside and outside buildings.
HP:
⅓ to 1.5
Voltage:
1 x 115 or 230
Flow rate:
up to 154 GPM
Maximum load:
52ft (16 mt)
Solids passage
up to 2 in
Applications:
Uses:
Residential and Commercial
This range has been developed to optimize the performance of the system of which it is a part, minimizing known risk factors and maintenance requirements. The submersible pumps that make up this range facilitate the efficient pumping of wastewater, feature high durability and are very easy to maintain.
Features:
These pumps are suitable for self-coupling installation.
HP:
⅓ to 1.5
Voltage:
1×115 or 230
Flow rate:
up to 154 GPM
Maximum load:
52ft (16 mt)
Solids passage
up to 2 in
Applications:
Uses:
Residential, commercial and industrial
A compact pump providing in-line pressure boosting for domestic use that has high efficiency and is designed for homes.
Features:
A compact pump providing in-line pressure boosting for domestic use that has high efficiency and is designed for homes.
Maximum flow rate:
8 GPM
Maximum load:
9m (13 psi)
Temperature:
2 to 60º C
Energy consumption:
40 watts
Operation:
Automatic – Manual
Silent:
Yes
Maintenance:
No maintenance required
Maintenance kit included:
Yes
Applications:
Uses:
Residential
A compact pump providing in-line pressure boosting for domestic use that has high efficiency and is designed for residential.
Features:
UPA boosts water pressure to the levels required for showers, faucets and other consumption points.
Power:
¼ HP
Tank::
Not required
Installation kit included:
Yes
Maximum flow rate:
13.2 GPM
Maximum load:
11.9 m
Energy consumption:
186 watts
Weight:
6.5 kg
Operation:
Automatic
Model:
Compact
Silent:
Yes
Maintenance:
No maintenance required
Applications:
Uses:
Residential
It is designed for domestic heating systems.
Features:
The pump provides reliable operation without requiring maintenance, as well as low energy consumption throughout its long service lifetime.
Maximum flow rate:
46 GPM
Maximum load:
37.5 ft
Working pressure:
145 psi maximum
Liquid temperature:
0 to 110º C
Applications:
Uses:
Residential
UPS hot water circulator pumps make up a complete range of 3-speed circulator pumps.
Features:
These pumps can be used in both open and closed systems. UPS pumps are encapsulated rotor pumps. That is, the pump and motor form a unit in which there is no shaft seal and only requires the use of two sealing joints. Lubrication of the bearings is achieved by the pumped liquid itself.
Maximum flow rate:
9 to 270 GPM
Maximum load:
1 to 62 ft
Working pressure:
145 psi maximum
Liquid temperature:
-10 to 110º C
Applications:
Uses:
Residential
Grundfos TP ranges vertical in-line pumps are used in a variety of applications.
Features:
Single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals. This cold-water circulator range offers remarkably high levels of reliability and efficiency, ideal for recirculation.
Maximum flow rate:
8 to 300 GPM
Maximum load:
3.5 to 67.5 ft
Working pressure:
145 psi maximum
Liquid temperature:
15 to 142º C
Applications:
Uses:
Industrial
Pump for cooling and heating pressure boosting.
Maximum flow rate:
30 to 600 GPM
Maximum load:
8 to 180 ft
Working pressure:
175 psi maximum
Liquid temperature:
-15 to 121º C
Applications:
Uses:
Industrial
The range has been upgraded with a new generation of more efficient pumps offering optimized hydraulic design for world-class energy efficiency.
Features:
Due to their reduced size, these pumps are also easier and less costly to install than standard pumps.
HP:
⅓ – 75
Voltage:
115, 230, and 460
Applications:
Uses:
Industrial
Features:
Options:
Capacity, Q:
Max. 30 l/h
Pressure, p:
Max. 16 bar
Reduction ratio:
1: 3000 or 1: 1000
Liquid temperature:
Max. 45 ºC
Applications:
Uses:
Industrial
SMART Digital diaphragm dosing pump with internal stepper motor.
Features:
Easy to operate with optimum price-performance ratio (Convenient Digital Dosing)
Applications:
Uses:
Industrial
Dosing pump with internal stepper motor. Easy to operate with optimum price-performance ratio (Convenient Digital Dosing).
Features:
The range consists of two models, which allows to cover the complete range of its operation.
Applications:
Uses:
Industrial
Its disinfection power is 2-5 times higher than other biocides.
Features:
Technical data by model
Mod. OCD-164
Mod. OCC-164
Mod. OCG-166
Mod. ISIA
Applications:
Uses:
Industrial, commercial and municipal
Disinfection with chlorine gas or sodium hypochlorite solutions.
Features:
Benefits:
Technical data by model
Mod. VGB
Mod. VGA
Mod. VGS
Applications:
Uses:
Industrial and commercial
Advanced, energy-efficient pressure boosting system for clean water pressure boosting. Available with 2-6 pumps connected in parallel, with all necessary connections and integration of an advanced controller exclusive to Grundfos.
Features:
Compact design and key features such as dry-running protection and soft start to reduce motor wear.
Maximum flow rate:
3,170 GPM
Maximum load:
150 mts (492 ft)
Working pressure:
230 psi maximum
Liquid temperature:
0 to 70º C
Applications:
Uses:
Industrial and commercial
The SQFlex system is a reliable water supply system based on renewable energy sources, such as solar and wind power. This system incorporates an SQF submersible pump.
Features:
Applications:
Uses:
Residential and Commercial
Vertical multistage pumps with renewable MGFlex motor for solar power sources. Operates on AC and DC voltage.
Applications:
Uses:
Residential and Commercial
Line available in Simplex (for 1 pump) or Duplex (for 2 pumps).
Features
Phases:
Single-phase, Three-phase
Voltage:
230/460
Applications:
Wastewater Pumps – Grundfos
Uses:
Industrial and commercial
LC 241 level controllers offer a wide range of features for wastewater pumping systems, monitoring and controlling one or two pumps up to 72 amps. Becoming a metal or plastic cabinet solution that gives you modularity and customization tailored to your needs.
Applications:
Uses:
Commercial
webmaster@powerdepot.mx
Av. Washington 59-A, Col. Ferrocarril, C.P. 44440
Guadalajara, Jalisco, México 
